Displacement: 0.25...2 cm³
Outlet pressure: up 200 bar
Speed: 750 …3500 rev/min
Fluid temperature: -20 … 80 °C
Working liquid: hydraulic oils
Viscosity: 16 … 200 mm²/s
Degree of filtration: 15-25µm

Displacement: 1...9.8 cm³
Outlet pressure: 250 bar
Speed: 650 …3500 rev/min
Fluid temperature: -20 … 80 °C
Working liquid: hydraulic oils
Viscosity: 20 … 200 mm²/s
Degree of filtration: 25µm

Displacement: 4.5...36 cm³
Outlet pressure: 250 bar
Speed: 650 …3500 rev/min
Fluid temperature: -20 … 80 °C
Working liquid: hydraulic oils
Viscosity: 20 … 200 mm²/s
Degree of filtration: 25µm

Displacement: 20...60 cm³
Outlet pressure: 250 bar
Speed: 650 …2500 rev/min
Fluid temperature: -20 … 80 °C
Working liquid: hydraulic oils
Viscosity: 20 … 200 mm²/s
Degree of filtration: 25µm

The technical characteristics are in compliance with the pumps of 10, 20 and 30 groups.
For more details, please see the catalogue.

The technical characteristics are determined by the compound gear pumps.
For more details, please see the catalogue.

Available:
Relief, Relief-Prefill, Unloading Relief, Pressure Reduction, Check, Flow Control, Dividing and Combining Valves
Nominal bore: 6 , 10 mm
Pressure control range: 5 … 100 bar
15 ... 200 bar
20 … 320 bar
Rated flow: 10 ... 160 l/min
Working temperature: -20 … 70 °C
Working liquid: hydraulic oils
Viscosity: 10 to 200 mm²/s
Degree of filtration: 25µm

Available:
Solenoid, Relief, Sequence, Needle, Manual, Pressure reduction Valves Operating pressure: 250 bars
Internal leakage: 0.22 cc/min at 250 bars
Fluid temperature: -20 … 90 °C
Working liquid: hydraulic oils
Viscosity: 10 … 800 mm²/s
Degree of filtration: 25µm

El. Motors:
AC 0.55...3 kW , mono or three-phase
DC 0.8... 3 kW ; 12 or 24 V
Tank volume: 1...60 l
Pump displacement: 1...6,1 cm³
Wide range of modular elements allowing the implmentation of additional hydraulic schemes.

 El. Motors:
DC 1... 3 kW ; 12 or 24 V
Tank volume: 2...15 l
Pump displacement: 1...6,1 cm3
Working pressure: up to 250 bar
Assembled with different valves depending on the hydraulic scheme.

El.motors
AC - to 25 kw.; 1-3 pieces
Mounting - vertical, horizontal, moved out;
Capacity of the tank - to 500 L.;
Displacement of the pump: 1-55 cm³
They are produced with a large variety of elements - accumulators,coolers and others for the realization of each concrete hydraulic sheme.

DC motor from all dimensions, coupled with gear pump - group 10 or group 20.
Different modifications and variants for implementation of various decisions.
More information You can find in our catalogue.

Displacement [cm3/rev.]         50 ÷ 315
Maximum pressure [bar]        140
Maximum oil flow [lpm]           25 ÷ 60
Maximum speed [RPM]          600
Maximum torque [daNm]        7.4 ÷ 30.5
Minimum speed [RPM]           10
Temperature range [°C]         -30 ÷ 90
Viscosity range [mm2/s]         20 ÷ 75

Displacement [cm3/rev.] 50 ÷ 400
Maximum pressure [bar] 175
Maximum oil flow [lpm]  60
Maximum speed [RPM] 1200
Maximum torque [daNm] 9.4 ÷ 50
Temperature range [°C] -30 ÷ 90
Viscosity range [mm2/s] 20 ÷ 75

Rated powers     0.2-1 kW
Rated voltages   12,24 V DC
Rated speed     1500-3000 r.p.m
Protection         IP44

Rated powers    1,5-2 kW
Rated voltages  12,24 V DC
Rated speed     2300-2700 r.p.m
Protection         IP44

Rated power     3 kW
Rated voltage   24 V DC
Rated speed    3500 r.p.m
Protection        IP44

Rated powers    5-10 kW
Rated voltages  24 -80 V DC
Rated speed     2400-2800 r.p.m
Protection         IP21